极速时时彩官网

当前位置:极速时时彩官网-极速时时彩官网 > 极速时时彩官网

山东通风管道:黑铁皮与白铁皮

发布人:http://www.fggsfs.com   发布时间:2019-06-04 16:33:38

  山东通风管道板材:黑铁皮与白铁皮

  Shandong Ventilation Pipeline Plate: Black Iron and White Iron暖通空调系统主要包括通风工程和空调工程两大局部。通风工程普通包括送风和排气、除尘和排毒工程。空调工程普通包括空调、恒温恒湿和空气净化工程。

  HVAC system mainly includes two parts: ventilation engineering and air conditioning engineering. Ventilation engineering generally includes air supply and exhaust, dust removal and detoxification engineering. Air conditioning engineering generally includes air conditioning, constant temperature and humidity and air purification engineering.

  通风工程与空调空调系统需求经过风道衔接,完成2F黑铁皮普通酸洗钢板(黑铁皮)的设计功用:由碳钢经热轧或冷轧制成。热轧钢过程的,由于很容易突破和空调用于冷轧,模型普通有Q195、Q215 Q235,有两品种型的表和线圈,常用的厚度为0.5 ~ 2毫米,黑色板近年来在暖通空调工程运用纯黑色单少,黑铁和锡的区别不是黑钢板外表处置,容易氧化和生锈。

  Ventilation works and air conditioning systems need to be connected through air ducts to complete the design function of 2F black iron sheet common pickling steel sheet (black iron sheet): made of carbon steel by hot or cold rolling. Hot rolled steel process, because it is easy to break through and air conditioning is used for cold rolling, the model generally has Q195, Q215 Q235, there are two types of surface and coil, the commonly used thickness is 0.5-2 mm, black sheet in recent years in HVAC engineering using pure black sheet, black iron and tin is not the difference between the surface treatment of black steel plate, easy oxidation and rust.

  锡

  tin

  镀锌钢板(铁皮):由镀锌黑铁皮制成,俗称铁皮。常用厚度0。5~1。5mm,规格尺寸与普通薄钢板(黑铁皮)相同。镀锌层厚度不小于0。02mm。镀锌铁的优点:外表具有防腐作用,所以普通不需求刷油防腐,普通用于保送酸雾作用的湿润环境通风系统和空调系统及配件。

  Galvanized steel sheet (iron sheet): Made of galvanized black iron sheet, commonly known as iron sheet. Commonly used thickness is 0.5-1.5 mm, the size is the same as that of ordinary thin steel plate (black iron sheet). The thickness of galvanized layer is not less than 0.02mm. Advantages of galvanized iron: The appearance has anti-corrosion effect, so it is not required to brush oil and anti-corrosion. It is commonly used for humid environment ventilation system and air-conditioning system and accessories to protect acid fog.

  山东通风管道

极速时时彩官网  Shandong Ventilation Pipeline

             山东通风管道

  管道装置的普通请求

  General Request for Pipeline Devices

  1)风管程度装置,程度度允许偏向不大于3mm / m,总偏向不大于20mm;风管垂直装置。垂直度允许偏向不大于2mm / m,总偏向不大于20mm。

极速时时彩官网  1) Ventilation duct degree device, degree allowable deviation is not more than 3m m/m, total deviation is not more than 20mm; Ventilation duct vertical device。 The allowable deviation of perpendicularity is not more than 2 m m/m and the total deviation is not more than 20 mm。

  2)管道吊架与法兰之间的间隔不得小于20mm。柔性短管长度150~300mm。金属软管和非金属软管长度不得大于2m,不得有死弯或垮落现象。

  2) The distance between the pipe hanger and the flange shall not be less than 20 mm. The length of flexible short tube is 150-300 mm. The length of metal hose and non-metal hose shall not be greater than 2m, and there shall be no dead bending or collapse.

极速时时彩官网  3)主气管吊架与支管之间的间隔不得小于200mm。

  3) The interval between the main pipe hanger and the branch pipe shall not be less than 200 mm.

  4)法兰螺栓与低压送风孔距不大于200mm,中压送风孔距不大于100mm。

  4) The distance between flange bolt and low pressure air supply hole is not more than 200 mm, and that between medium pressure air supply hole is not more than 100 mm.

极速时时彩官网  5)风管弯头、三通、阀门处必需加吊钩。管道长度应超越15m,防摇支架不得小于1根。

  5) Hooks must be added at elbows, tees and valves of air ducts. Pipeline length should exceed 15m and anti-sway bracket should not be less than 1.

  6)通风管道吊架间隔不保温风管边缘30mm,间隔保温风管保温层边缘30mm。

  6) The suspension rack of ventilation duct is separated by 30 mm of the edge of the insulating duct and 30 mm of the insulating layer of the insulating duct.

  7)风管保温应平整,法兰必需单独保温,法兰保温资料应与管道分歧。风管程度度为3‰,垂直度为2‰,总偏向不超越20mm。

极速时时彩官网  7) Air duct insulation should be flat, flange insulation must be separate, flange insulation data should be different from the pipeline. The degree of duct is 3, the vertical degree is 2 and the total deviation is not more than 20 mm.

  8)风管与法兰压边座宽度为6~9mm,严密、直触。

  8) The width of air duct and flange blank holder is 6-9 mm, which is close and direct contact.

                  山东通风管道

  9)玻璃钢管道法兰衔接时,法兰螺栓间距不大于120mm,法兰间距平均,法兰应平整,法兰垫片厚度为3~5mm。

极速时时彩官网  9) When connecting the flanges of FRP pipelines, the spacing of flange bolts is not more than 120 mm, the spacing of flanges is average, the flanges should be flat, and the thickness of flange gaskets should be 3-5 mm.

  10)玻璃纤维管道长度超越20m时,应增加不少于一个固定支架;玻璃纤维风管长度超越20m时,应按设计请求增加伸缩缝。

  10) When the length of fiberglass duct exceeds 20m, not less than one fixed bracket shall be added; when the length of fiberglass duct exceeds 20m, the expansion joint shall be added according to the design request.

  11)气管经过的收缩节采用软衔接。软管长度为100mm +伸缩缝宽度。风管保温资料为岩棉时,保温采用铁角打包带,间距0.6~0.7m。通风管道规格400mm以下的支吊架间距不得大于4m,通风管道规格400mm以上的支吊架间距不得大于3m。

  11) The contraction joints of trachea are connected by soft joint。 The length of hose is 100mm + the width of expansion joint。 When the data of air duct insulation is rock wool, iron angle packing belt is used for insulation, and the spacing is 0。6-0。7m。 The spacing between supports and hangers with ventilation pipe specifications of less than 400 mm shall not be greater than 4 m, and that between supports and hangers with ventilation pipe specifications of more than 400 mm shall not be greater than 3 m。

  13)风管垂直装置,支架间距不大于4m,玻璃管不大于3m。

  13) Ventilation pipe vertical device, bracket spacing is not more than 4m, glass tube is not more than 3m.

  14)排气管与屋面风机衔接采用6mm橡胶垫,镀锌螺栓加平垫、弹簧垫圈。

  14) The exhaust pipe and the roof fan are connected by 6mm rubber pad, galvanized bolt with flat pad and spring washer.

  15)室外铁管保温应平整、润滑,咬合不小于20~25mm。

  15) Outdoor iron pipe insulation should be smooth and lubricated, and the occlusion should not be less than 20-25 mm.


上一篇:通风管的消声器技术原理你知道吗
下一篇:最后一页

网站极速时时彩官网 关于我们 产品展示 极速时时彩官网 工程案例 在线留言 联系我们

秒速飞艇开户 湖南快乐十分 秒速快三打法 秒速飞艇哪个平台好 秒速飞艇官网 湖南快乐十分计划 福建快3开奖 湖南快乐十分走势 秒速飞艇是真的吗 秒速飞艇是真的吗